The notice below has expired - To receive our email alerts in the future please click here for a free trial.
Procurement Notice Details
Nuclear, biological, chemical and radiological protection equipment [clinical research imaging centre refurbishment — hot cells and dispenser]
Purchaser: University of Edinburgh
26/06/2018 S120 - - Supplies - Prior information notice without call for competition - Not applicable
United Kingdom-Edinburgh: Nuclear, biological, chemical and radiological protection equipment
Prior information notice
This notice is for prior information only
Section I: Contracting authority
Name and addresses
University of Edinburgh
Charles Stewart House, 9-16 Chambers Street
Telephone: +44 1316502508
NUTS code: UKM75
Main address: http://www.ed.ac.uk/schools-departments/procurement/supplying
Address of the buyer profile: https://www.publiccontractsscotland.gov.uk/search/Search_AuthProfile.aspx?ID=AA00107
Information about joint procurement
Additional information can be obtained from the abovementioned address
Type of the contracting authority
Body governed by public law
Section II: Object
Scope of the procurement
CRIC Refurbishment — Hot Cells and Dispenser
Reference number: EC0823
Main CPV code
Type of contract
See additional information section V1.3)
Estimated total value
Value excluding VAT: 725 000.00 GBP
Information about lots
This contract is divided into lots: no
Additional CPV code(s)
Place of performance
NUTS code: UKM73
Main site or place of performance:
Clinical Research Imaging Centre (CRIC)
The Queen's Medical Research Institute
College of Medicine and Veterinary Medicine
47 Little France Crescent
Description of the procurement:
Clarification / site survey will be included as part of the tender process.
Tender to be out for approximately 5-6 weeks.
It is envisaged that a scored demonstration will be part of the award criteria.
Estimated date of publication of contract notice:
Section IV: Procedure
Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: yes
Section VI: Complementary information
Edinburgh imaging has decided to expand its PET radiochemistry GMP facility, located at the Queen’s Medical Research Institute in Edinburgh to increase its GMP PET radiotracer production capacity.
The new facility will house additional hot cells to be installed in the new extension of the clean room. The intention is to have the new hot cells assembled as a row to integrate into the structure of the clean room and to form one of the walls.
The row of hot cells will comprise 1 aseptic dispensing cell, 1 dispensing cell equipped with an autoclave and 4 synthesiser hot cells with at least one associated cabinet to house the ancillary equipment supplied with the synthesisers.
The synthesiser hot cells will need to operate to GMP Grade C and be large enough to house any commercially available synthesiser. The aseptic dispenser and the dispenser equipped with an autoclave will respectively operate to GMP Grade A and GMP Grade C.
It is expected that the selected supplier will have to comply with the GMP guidelines from design to commissioning of the purchased equipment and will install it within the spatial constraint of the lab.
Other project constraints:
1) The max installation width for all the units side by side in a row = 6 350 mm;
2) The max installation height for all units = 2 600 mm
Note: To register your interest in this notice and obtain any additional information please visit the Public Contracts Scotland Web Site at https://www.publiccontractsscotland.gov.uk/Search/Search_Switch.aspx?ID=543565.
Date of dispatch of this notice:
http://ted.europa.eu/, TED database, © European Communities, 1995-2018.