|
IMPORTANT NOTE:
The notice below may have expired - To receive our email alerts in the future please click here for a free trial.
|
Procurement Notice Details
Pipeline, piping, pipes, casing, tubing and related items [piping for the wendelstein w7-x fusion experiment]
Germany
Purchaser: Max-Planck-Gesellschaft zur Förderung der Wissenschaften, Max-Planck-Institut für Plasmaphysik
10/08/2018 S153 - - Supplies - Contract notice - Open procedure I.II.III.IV.VI. Germany-Greifswald: Pipeline, piping, pipes, casing, tubing and related items
2018/S 153-350543
Contract notice
Supplies
Legal Basis:
Directive 2014/24/EU Section I: Contracting authority
I.1) Name and addresses Max-Planck-Gesellschaft zur Förderung der Wissenschaften, Max-Planck-Institut für Plasmaphysik TI Greifswald DE801 Wendelsteinstraße 1 Greifswald 17491 Germany Contact person: Sekretariat Einkauf Telephone: +49 3834882323 E-mail: einkauf200@ipp.mpg.de Fax: +49 3834882349 NUTS code: DE80N Internet address(es):
Main address: http://ipp.mpg.de
I.2) Information about joint procurement I.3) Communication The procurement documents are available for unrestricted and full direct access, free of charge, at: https://datashare.rzg.mpg.de/s/4BcXzPG3GROWwOF Additional information can be obtained from the abovementioned address Tenders or requests to participate must be submitted to the abovementioned address I.4) Type of the contracting authority Other type: Einrichtung des privaten Rechts I.5) Main activity Other activity: Grundlagenforschung Section II: Object
II.1) Scope of the procurement II.1.1) Title: Fertigung, Prüfung und Lieferung von Verrohrungen am Fusionsexperiment Wendelstein W7-X, einschließlich Heißlecktests
Reference number: 200-18-08 II.1.2) Main CPV code 44160000 II.1.3) Type of contract Supplies II.1.4) Short description: Eine wichtige Komponente des Stellerators W7-X sind die Stutzen. Sie verbinden das innere Plasmagefäß mit der äußeren Schutzhülle (Außengefäß). Durch diese Stutzen werden Diagnostiken und Versorgungsleitungen vakuumdicht in das Plasmagefäß eingeführt. Innerhalb des Stutzens befindet sich ein Ultrahochvakuum mit 10-8 mbar.
Eine wassergekühlte Stutzenauskleidung (im weiteren Dokument nur noch Port Liner genannt) schützt die Stutzen vor thermischer Belastung während des Plasmabetriebes. Die Kühlwasserversorgung der Port Liner kommt aus Richtung des Stutzenflansches.
Die Relativbewegungen zwischen Plasmagefäß und Außengefäß werden über einen Stutzenbalg abgefangen. Aus dem gleichen Grund wird die Kühlwasserverrohrung für die Port Liner in diesem Bereich als Rohrschleifen und -spiralen ausgeführt.
Die Komponente „Port Liner“ ist in drei Abschnitte untergliedert.
Zum Lieferumfang gehört die Verrohrung und die Rohrdurchführung in jeweils unterschiedlichen Varianten.
II.1.5) Estimated total value II.1.6) Information about lots This contract is divided into lots: yes Tenders may be submitted for all lots Maximum number of lots that may be awarded to one tenderer: 4 II.2) Description II.2.1) Title: Mechanische Fertigung Zwischenflansche, Passringe und Rohrdurchführungen
Lot No: 1 II.2.2) Additional CPV code(s) 44167110 II.2.3) Place of performance NUTS code: DE80N II.2.4) Description of the procurement: Fertigung und Prüfung von Flanschen, Passringen und Rohrdurchführungen
II.2.5) Award criteria Criteria below Price II.2.6) Estimated value II.2.7) Duration of the contract, framework agreement or dynamic purchasing system Start: 28/12/2018 End: 31/08/2019 This contract is subject to renewal: no II.2.10) Information about variants Variants will be accepted: no II.2.11) Information about options Options: no II.2.12) Information about electronic catalogues II.2.13) Information about European Union funds The procurement is related to a project and/or programme financed by European Union funds: no II.2.14) Additional information II.2) Description II.2.1) Title: Rohrfertigung
Lot No: 2 II.2.2) Additional CPV code(s) 44164310 II.2.3) Place of performance NUTS code: DE80N II.2.4) Description of the procurement: Fertigung der Rohrschleifen für die Verrohrung der Portliner
II.2.5) Award criteria Criteria below Price II.2.6) Estimated value II.2.7) Duration of the contract, framework agreement or dynamic purchasing system Start: 29/12/2018 End: 31/08/2019 This contract is subject to renewal: no II.2.10) Information about variants Variants will be accepted: no II.2.11) Information about options Options: no II.2.12) Information about electronic catalogues II.2.13) Information about European Union funds The procurement is related to a project and/or programme financed by European Union funds: no II.2.14) Additional information II.2) Description II.2.1) Title: Zusammenbau der Teile aus Los-1 und Los-2 zu Komplettbaugruppen
Lot No: 3 II.2.2) Additional CPV code(s) 45223100 II.2.3) Place of performance NUTS code: DE80N II.2.4) Description of the procurement: Zusammenbau der Teile aus Los-1 und Los-2 dieser Auftragsbekanntmachung, einschließlich schweißen
II.2.5) Award criteria Criteria below Price II.2.6) Estimated value II.2.7) Duration of the contract, framework agreement or dynamic purchasing system Start: 29/12/2018 End: 31/08/2019 This contract is subject to renewal: no II.2.10) Information about variants Variants will be accepted: no II.2.11) Information about options Options: no II.2.12) Information about electronic catalogues II.2.13) Information about European Union funds The procurement is related to a project and/or programme financed by European Union funds: no II.2.14) Additional information II.2) Description II.2.1) Title: Heißlecktest der Komplettbaugruppen aus Los-3
Lot No: 4 II.2.2) Additional CPV code(s) 71631430 II.2.3) Place of performance NUTS code: DE80N II.2.4) Description of the procurement: Heißlecktests an den Gesamtbaugruppen aus Los-3 dieser Auftragsbekannmachung
II.2.5) Award criteria Criteria below Price II.2.6) Estimated value II.2.7) Duration of the contract, framework agreement or dynamic purchasing system Start: 29/12/2018 End: 31/08/2019 This contract is subject to renewal: no II.2.10) Information about variants Variants will be accepted: no II.2.11) Information about options Options: no II.2.12) Information about electronic catalogues II.2.13) Information about European Union funds The procurement is related to a project and/or programme financed by European Union funds: no II.2.14) Additional information Section III: Legal, economic, financial and technical information
III.1) Conditions for participation III.1.1) Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers III.1.2) Economic and financial standing Selection criteria as stated in the procurement documents III.1.3) Technical and professional ability Selection criteria as stated in the procurement documents III.1.5) Information about reserved contracts III.2) Conditions related to the contract III.2.2) Contract performance conditions: III.2.3) Information about staff responsible for the performance of the contract Section IV: Procedure
IV.1) Description IV.1.1) Type of procedure Open procedure IV.1.3) Information about a framework agreement or a dynamic purchasing system IV.1.4) Information about reduction of the number of solutions or tenders during negotiation or dialogue IV.1.6) Information about electronic auction IV.1.8) Information about the Government Procurement Agreement (GPA) The procurement is covered by the Government Procurement Agreement: yes IV.2) Administrative information IV.2.1) Previous publication concerning this procedure IV.2.2) Time limit for receipt of tenders or requests to participate Date: 19/09/2018 Local time: 14:00 IV.2.3) Estimated date of dispatch of invitations to tender or to participate to selected candidates IV.2.4) Languages in which tenders or requests to participate may be submitted: German IV.2.6) Minimum time frame during which the tenderer must maintain the tender Tender must be valid until: 22/11/2018 IV.2.7) Conditions for opening of tenders Date: 19/09/2018 Local time: 14:01 Section VI: Complementary information
VI.1) Information about recurrence This is a recurrent procurement: no VI.2) Information about electronic workflows VI.3) Additional information: VI.4) Procedures for review VI.4.1) Review body Vergabekammer des Bundes Villemombler Straße 76 Bonn 53123 Germany Telephone: +49 228-9499-0 E-mail: vk@bundeskartellamt.bund.de Fax: +49 2289499-163 Internet address: http://www.bundeskartellamt.de
VI.4.2) Body responsible for mediation procedures VI.4.3) Review procedure Precise information on deadline(s) for review procedures: Die Einlegung von Rechtsbehelfen richtet sich nach dem Vierten Teil des GWB, wir weisen insbesondere auf die in § 160 Abs. 3 GWB geregelten Fristen hin:
„Ein Nachprüfungsantrag ist unzulässig, soweit:
1) der Antragsteller den geltend gemachten Verstoß gegen Vergabevorschriften vor Einreichen des Nachprüfungsantrags erkannt und gegenüber dem Auftraggeber nicht innerhalb einer Frist von 10 Kalendertagen gerügt hat; der Ablauf der Frist nach § 134 Absatz 2 bleibt unberührt;
2) Verstöße gegen Vergabevorschriften, die aufgrund der Bekanntmachung erkennbar sind, nicht spätestens bis zum Ablauf der in der Bekanntmachung benannten Frist zur Bewerbung oder zur Angebotsabgabe gegenüber dem Auftraggeber gerügt werden;
3) Verstöße gegen Vergabevorschriften, die erst in den Vergabeunterlagen erkennbar sind, nicht spätestens bis zum Ablauf der Frist zur Bewerbung oder zur Angebotsabgabe gegenüber dem Auftraggeber gerügt werden;
4) mehr als 15 Kalendertage nach Eingang der Mitteilung des Auftraggebers, einer Rüge nicht abhelfen zu wollen, vergangen sind.
Satz 1 gilt nicht bei einem Antrag auf Feststellung der Unwirksamkeit des Vertrags nach § 135 Absatz 1 Nummer 2. § 134 Absatz 1 Satz 2 bleibt unberührt.“
VI.4.4) Service from which information about the review procedure may be obtained VI.5) Date of dispatch of this notice: 08/08/2018
http://ted.europa.eu/, TED database, © European Communities, 1995-2018.
|
|